A200C
- Home
- Victor Taichung
- LATHES CNC
- A200C
BASE AND WAGON
The base is built in a single cast iron Meehanite ® with oversized ribs able to withstand the most severe stresses. This is subjected to outdoor stabilization treatment for a minimum period of 6 months allowing to eliminate the remaining internal tensions; the geometry of the "slant" type (including 45°) has been designed to facilitate chips evacuation as well as the accessibility to the machine by the operator. Base and wagon are designed according to the application of the analysis and design system (FEA). Using this system the computer determines the thickness and dislocation of the internal ribs. The two upper flat guides for the longitudinal movement of the wagon (z axis) are obtained from the basement.
GUIDES
The lathe guides are flat, cut directly from the machine base. Wagon, turret and tailstock movements takes place between the materials cast iron on steel with a thread of oil interposed to pressure. In this way Turcite or other antifriction material necessary for handling is not used, thus allowing a strong stability during processing and at the same time an increase in the life of the guides, drastically reducing the maintenance of the same.
SPINDLE LINE
It has a monolithic structure in Meehanite ® cast iron, fastened to the base on the base. The structure itself is "thermally symmetrical" to limit the effects of any temperature ranges that might be generated. An efficient cooling system with external cooling unit keeps the temperature constant. The motion transmission is carried out by belt. Standard is mounted a Fanuc αiIP15 motor (7.5-9 kW); option you can mount a more powerful Fanuc αiIP22 motor (11-15 kW).
MOTORIZED TURRET BMT-55
It’s 12 positions with a BMT-55 attack. Turret is built in-house in Victor’s owned facilities. It is designed for coolant exit outside and inside the tool holders. The positioning and bi-directional rotation of the platter is ensured by an extremely fast and reliable FANUC motor with an indexing time of only 0.3 sec. (tool to tool). As for motorized tools the bike is transmitted by a Fanuc motor of 4kw / 4000rpm (opz. 6000rpm).
TAILSTOCK
It has a Meehanite ® cast iron structure. The body is positioned by attaching to the turret wagon, taking advantage of the handling of the Z axis. The tailstock has a diameter of 75mm, and the stroke of the boat is 80mm.
CHIP CONVEYOR
It’s positioned with the drain facing the tailstock, hinged type. Its maintenance and cleaning is extremely simple and fast, extracting it from the front of the machine. The dimensions of the conveyor have been sized for a long life while having to evacuate a large amount of steel chips or other material. The chip pick-up trolley is included also.
REFRIGERATION TOOL UNIT
It is complete with a very large collection tank capable of collecting up to 330L pump and pipes for the refrigeration of tools; the supply is brought directly to the turret tool. Upon request the system is equipped with additional high pressure pumps and systems for waste oil recovery in the tank to prevent the pollution of emulsions.
ELECTRONIC EQUIPMENT
The system is integrated with the machine CNC and is complete with a watertight cabinet. All controls as well as the steering unit are located at the front, while the control cabinet is located at the rear of the machine. An effective air conditioning system ensures that the operating temperature inside the electrical enclosure is controlled and constant to prevent that electronic components used from being damaged, especially in warmer seasons.
AUTOMATIC LUBRIFICATION SYSTEM
It includes the lubrication units, equipped with a timer and a series of dosing units for the automatic lubrication of: sliding guides - ball screws - bearings. An audible warning device warns us if the level has reached the minimum allowed while continuing to lubricate. To ensure that the system is fully functional there are pressure switches that measure circuit pressure that releases the liquid only when set pressure has been reached; if this does not happen due to leakage an alarm arises. The basement structure has been realized for the recovery of most of the waste oil in a special tray placed in the back of the machine.
TECHNICAL FEATURES
Travels:
Between centers | 604 mm |
Maximum turning diameter on carriage | 720 mm |
Max turning diameter | 390 mm |
X axis travel | 165+50 mm |
Y axis travel | ± 45 mm |
Z axis travel | 600 mm |
Spindle
Spindle bar capacity | 52 (opt. 66) mm |
Max spindle speed | 4200 rpm |
Spindle nose | ASA A2-6 |
Torretta:
Max turret speed | 6000 rpm |
Number of turret positions | 12 |
Attacco torretta | BMT-55 |
Avanzamenti:
Rapid feedrate X-Z | 24 m/min |
Y axis speedrate | 10 m/min |
Motori:
Spindle motor | 7,5-9 (opz. 11-15, 15-18,5) kW |
Driven tool motor | 5,5 kW |
X-Z axis servo-motor | 3 - 4 kW |
Y axis servo-motor | 3 kW |
Size and weight:
Length | 3882 mm |
Width | 2430 mm |
Height | 2286 mm |
Weight | 6800 kg |
C.F. e P.iva 04801780281
SDI J6URRTW
info@vimak.it
0429.778060 - 0429.763525