V560C
C.F. e P.iva 04801780281
SDI J6URRTW
info@vimak.it
0429.778060 - 0429.763525
Max rotary diameter | 600 mm |
Max turning height | 500 mm |
Max turning diameter | 560 mm |
Z axis travel | 520 mm |
Max turret speed | 3000 rpm |
Number of turret positions | 8 |
Attacco torretta | VDI-40 |
Rapid feedrate X-Z | 15 - 24 m/min |
Length | 3250 mm |
Width | 1560 mm |
Height | 2918 mm |
Weight | 6100 kg |
BASE, UPRIGHT AND CROSSBAR
The base, the upright and the crossbar are built in a single cast Meehanite ® cast iron with oversized ribs able to withstand the most severe stresses. These are subjected to outdoor stabilization treatment for a minimum period of 6 months allowing to eliminate the remaining internal tensions; the geometry of the base has been designed to facilitate chips evacuation and the accessibility to the machine by the operator. Base, upright and crossbar are designed according to the application of the analysis and design system (FEA). Using this system the computer determines the thickness and dislocation of the internal ribs. On the very stable base is fixed the upright on which are obtained the two flat guides for the movement of the Z axis. On the upright in turn is fixed the crossbar that supports the very rigid turret body on which are made the two flat guides for the movement of the axis X.
GUIDES
The lathe guides are flat. Turcite is used to move the Z and X axes. The width of the guides of both axes are oversized, thus allowing to withstand even the most demanding machining.
SPINDLE LINE
It has a monolithic structure in Meehanite ® cast iron fastened to the base on the base. The structure itself is "thermally symmetrical" to limit the effects of any temperature ranges that might be generated. An efficient cooling system with external cooling unit keeps the temperature constant. The transmission of the motion is by belt, with optional mechanical gear box GTP. Standard is mounted a motor Fanuc αP40i (18.5-22kw). It is possible to mount a more powerful Fanuc α30i (30-37kw) engine with gear box.
MOTORIZED TURRET VDI-40
It’s 8 positions with VDI-40, DIN-5482. SAUTER turret is designed for coolant exit outside and inside the tool holders. The positioning and bi-directional rotation of the platter is guaranteed by an extremely fast and reliable Fanuc motor with an indexing time of only 1 sec. As for motorized tools, the motion is transmitted by a Fanuc 4kw / 3000rpm motor.
CHIP CONVEYOR
It is positioned with the rear exhaust to the machine allowing a considerable reduction of the machine footprint. Its maintenance and cleaning is extremely simple and fast. Carpet dimensions have been dimensioned for a long life while having to evacuate a large amount of steel chips or other material. Also included is the chip pick-up trolley.
REFRIGERATION TOOL UNIT
It is complete with a very large collection tank capable of collecting up to 260L pump and pipes for the refrigeration of tools; Supply is brought directly to the turret. Upon request the system is equipped with additional high pressure pumps and systems for the waste oil recovery in the tank to prevent the pollution of emulsions.
ELECTRONIC EQUIPMENT
The system is integrated with the machine CNC and is complete with a watertight cabinet. All controls as well as the steering unit are located at the front, while the control cabinet is located at the rear of the machine. An effective air conditioning system ensures that the operating temperature inside the electrical enclosure is controlled and constant to prevent that electronic components used from being damaged, especially in warmer seasons.
AUTOMATIC LUBRIFICATION SYSTEM
It includes the lubrication units, equipped with a timer and a series of dosing units for the automatic lubrication of: sliding guides - ball screws - bearings. An audible warning device warns us if the level has reached the minimum allowed while continuing to lubricate. To ensure that the system is fully functional there are pressure switches that measure circuit pressure that releases the liquid only when set pressure has been reached; if this does not happen due to leakage an alarm arises. The basement structure has been realized for the recovery of most of the waste oil in a special tray placed in the back of the machine.